Fixing a Clogged Garbage Disposal
Here’s one goof you can prevent by making sure it never happens. Most garbage disposal clogs are caused by fibrous foods, grease and fat, eggshells, too much pasta, or nonfood items like tabs and rubber bands.Clearing out a clogged disposal unit is best left to a pro plumber, but you can approach it as a DIY job if you take careful precautions:
— Turn off the power to the unit. Unplug it if possible.
— Never, ever place your hand into the grinding chamber, even if the power is off.
— Use a flashlight to look inside the disposal for visible blockage. Use tongs or a similar tool to remove any blockage.
— If you can’t see anything inside, look underneath your sink. In the center on the bottom of the disposal, insert a quarter-inch hex wrench into the hole. Work it back and forth until you can turn it in a full circle. Look inside and remove any object with tongs.
— If a hole is not present at the bottom of the disposal, use the tongs or a broom handle in the sink hole to work the blades back and forth. Check again for obstructions.
— Check for the reset button on the bottom of the disposal. When you find it, push the button to reset the garbage disposal.
Noisy Cabinets and Doors
This is less of a goof than a hassle, but you’ll undoubtedly appreciate getting rid of it. Newer soft-close hinges and drawers have been offered in recent kitchen cabinets, but homes before the 2000s won’t have them. But if you’re tired of the constant noise when kids are ransacking the cabinets looking for snacks, you can address the problem without breaking the bank and overhauling your whole kitchen.Cabinet noises happen because there’s nothing but a wood door or drawer hitting the face frame of the cabinet. Many cabinets have rubber bumpers on their edges, but these wear off over time.
The easiest solution is to purchase self-adhesive bumpers and apply them to each corner, minimizing clanking.
You can also add soft-close dampers to the hinges and frames. This requires a little more cost and effort with a screwdriver.
Childproofing
You can hire a childproofing pro to entirely go over your home at an average of $400. But you can also take steps to make your home as safe as possible. You already know to set up baby gates and place childproof plugs in electrical outlets and latches on drawers and cabinets to keep out little fingers. But don’t overlook choking hazards, either. Keep children away from drawstrings on window shades — or upgrade to string-free shades. Use toilet locks, pool fencing, and other water-hazard protections to protect against drowning.Get Scratches out of Hardwood Floors
Here’s a fix for a goof that’s already happened. Scratches can seriously tarnish the beauty of your hardwood floors and furniture, but there is a way to disguise them — with a walnut!Simply crack the meat of a walnut in half and run it over the scratch from several angles. Rub it with your finger, then wipe away the excess. The walnut oil will work into the damage and restore the color. It’s not a flawless fix, but it’s a budget-friendly, easy and effective way to restore wood floors.